To keep the quality and taste of your beer intact, you need to regularly clean the beer lines. However, it’s not just the lines that need attention; you need to pay attention to other crucial aspects, which are the beer line cleaning pump. If the beer line is not maintained regularly, it can result in poor beer quality and system malfunctions. In this article, we’ll list five tips for cleaning beer pumps.
1. Disassemble and Inspect the Pump Regularly
The first step to maintaining your beer line cleaning pump is to disassemble it and inspect the parts thoroughly to be sure of the functioning of the beer pumps. With regular use of beer pumps, residue, yeast, and hops can build up inside the pump, which needs to be cleaned for health purposes.
When beer pumps are left unchecked, it can cause blockages and even damage the pump. Disassemble pumps every few months to identify signs of wear and tear, clean hard-to-reach spots, and replace any parts if necessary.
2. Flush with Clean Water After Each Use
It’s important to consider that after each cleaning cycle, you need to flush the beer line cleaning pump with clean water. It helps in removing any remaining cleaning solution and beer residue to prevent any buildup in the pump and lines.
When you run a thorough flush by circulating clean water through the entire beer-dispensing system, that can include pumps and beer lines. It can help you maintain the pump’s efficiency and keep the beer fresh during this time.
3. Use the Right Cleaning Solution
Just as cleaning beer pumps is crucial, so is using appropriate cleaning solution. Not every type of cleaning chemical is suitable for cleaning pumps. You should consult your pump’s manual to determine the best cleaning solution for your beer line.
Keep in mind that line cleaning solution rituals should not damage sensitive components such as seals, gaskets, and plastic parts. If you feel difficulty in choosing the right cleaning solution for your beer lines, it’s best to hire a professional beer line and Cool Room Brisbane services to do the job for both your beer lines and commercial refrigerators.
4. Check and Clean the Strainer Regularly
Strainers in beer line cleaning pumps catch debris and prevent large particles from entering the pump mechanism. With regular use of beer line cleaning pumps, strainers can get clogged with beerstone, hop residue, and other debris. A clogged strainer can cause the pump to work less effectively and damage the system or compromise the beer’s cleanliness.
It’s important to check and clean the strainer regularly. Also, the cleanliness time depends on the amount of beer dispensed. To clean the strainer, thoroughly rinse it under warm water and scrub it with a soft brush to remove any buildup. It’s best to hire a professional beer line cleaning pump and commercial refrigeration Brisbane services to maintain the beer line pump and commercial refrigeration in your bar.
5. Store the Pump in a Dry, Clean Environment
Proper storage is crucial to ensure that regular cleaning is crucial to preserve the longevity of the beer line cleaning pump. Once the pump is used, ensure that it’s stored in a dry and clean environment. Store the pump in damp to encourage the growth of mould or mildew.
Store the pump in a dedicated storage space so that you keep it away from direct sunlight and temperature. Keep the pump covered and off the floor to protect it from dirt and debris. Before storing the pump for a longer period of time, it is best to thoroughly clean, dry, and disassemble it to prevent any buildup.
Conclusion
Beer line cleaning pump is crucial to ensure that beer tastes fresh and good. With the help of these five tips, you can ensure you keep your beer line cleaning pump in optimal condition. Regular maintenance of pumps can extend the life of the equipment and ensure that the customers enjoy a fresh, great-tasting brew every time.
erika john 
Sam Wilson