and CCENT test and, for a thorough explanation. Outline Relay is a piece of virtually all Wide Area Network (WAN) that you’ll have to use and you should understand how to create and research FR for long-lasting success in the test room and in your work.
To help you complete your CCNA and CCENT exams and prepare yourself for real success, here are without 10 Cisco certification test questions about Frame Relay. Some are available, while others don’t . All things considered, there’s not a alternative at the time of the purchase in the middle!
1. The Frame Relay supplier is promising you a certain amount of capacity for data transfer that is available to you at any date. What abbreviation is used to describe that reliable capacity for transmission?
A. DE
B. CIR
C. LMI
D. BECN
E. FECN
2. Frame Relay cloud is what? Frame Relay cloud is comprised of what types of gadgets?
A. Outline Relay switches are operating as DCEs
B. Outline Relay switches are operating as DTEs
C. Outline Relay switches working as DCEs
D. Outline Relay switches operating like DTEs
3. Which of the terms describes Frame Relay?
A. bundle exchanging
B. circuit-exchanging
C. moderately inexpensive in comparison to other WAN networks.
D. generally expensive when compared with other WAN accessibility techniques
4. What types of messages are used as keepalives between DTE or DCE?
A. LMI
B. DLCI
C. DE
D. CIR
5. Short answer: What’s the standard exemplification type of an Cisco switch’s Point of interaction serial?
6. Short answer: If LMI Autosense is active, what message type(s) do the DTE send to the DCE?
7. Short answer: If LMI Autosense is active, what message type(s) do that DCE after this moment, send to the DTE after receiving the message(s) that are in reference to 6.
8. What is the procedure that led to the subsequent result?
LMI Statistics for the interface Serial0 (Frame Relay DTE) LMI Type = ANSI
Invalid Unnumbered information 0. Invalid Prot Disk 0
Invalid faker Call Ref Unvalid Type of Msg 0
Invalid Status Message 0 Invalid Lock Shift 0
Invalid Information ID 0 Invalid Report IE Len 0
Invalid Reporting Request: 0 Invalid Report Request 0 Invalid IE Len 0
Num Status Enq. Sent 121 Num Status msgs Rcvd 94
Num Update Status Rcvd Num Update Status Timeouts 26
A. sketch outline of PVC
B. draw outline of LMI
C. outline breaks
D. examine outline of lmi
9. What was the order that brought about the result?
R1#
3d04h Serial0(out): StEnq myseq 49. Yourseen 94 DTE down
3d04h, datagramstart = 0, size = 14
3d04h: FR encap = 0x00010308.
3d04h: 00 75 95 01 01 00 03 02 31 5E
A. Show outline of the outline of pvc
B. draw outline of LMI
C. Show outline of D. highlight outline
D. troubleshoot outline lmi
10. Short answer What convention is used to enable the dynamic Frame Relay planning?
Here are the answers! No looking!
1. (B). This is CIR, which is also known as the Committed Rate. or the CIR.
2. (A). (A). Frame Relay cloud is comprised components of Frame Relay switches and they are DCEs.
3. (A, C). Outline Relay is a bundle exchanging convention. A important advantage of Frame is the cost it’s a bit low!
4. (A). (A). Local Management Interface seems like something like a GUI however it’s not. In addition to other functions, the LMI serves as a way to keep the connection alive between DTE in addition to the DCE. If there is an LMI bundle, the main connection point will stay up , however the line configuration will be lowered.
5. The most common type of Cisco Serial point of interaction is HDLC as shown here using show serial0 of the interface. This particular point of interaction has been shut down, but the standard embodiment type is shown when you look at the order yield.
R1#show int serial0
Serial0 is down for the count Line convention is down
The equipment is HD64570
MTU 1500 bytes BW 1544 Kbit DLY 20000 usesc,
Unwavering quality 255/255, TXload 1/255, rxload
Epitome HDLC Loopback not set
6. and 7. When LMI Autosense is running and it will trigger the DTE is required to send 3 LMI Status notifications. The DCE will respond by sending the same LMI Status notification. The DTE detects the Status message as it arrives and, from that point on, it will send it the LMI Status message in a format that matches the type it received via the DCE.
8. (B) This is the result of managing the entire outline of the LMI order. It is a fantastic starting point for Frame Relay studying.
9. (D) This is the result from running a troubleshoot plan using lmi. Always be aware when running troubleshooting in a company that creates Don’t run an investigation without knowing the result that follows, and can cause the switch to become ineffective.
10. Converse ARP empowers dynamic Frame Relay planning. Converse ARP is typically inaccessible within the current organizations This is accomplished by applying an edge-free arp procedure at the point of interaction.
Look for additional Cisco affirmation practice questions on this website!
Chris Bryant, CCIE #12933 is the owner of The Bryant Advantage, home of no-cost CCNA and CCNP tests and the Ultimate CCNA Exam Package as well as Ultimate CCNP Exam Packages.
Check out this blog which gets updated daily to day , with fresh Cisco accreditation content as well as free instructional exercises and daily CCNA/CCNP test-taking questions!
A seven-section free training course called “How You Can Pass The CCNA” It is also available.
Take advantage of you your Cisco CCNP Boot Camp with this outstanding course training program from The Bryant Advantage!
Related Links:
